S30 Valve Replacement Rubbers
Product Ref: THB00821
Price: £4.95
Replacement valve seals for either a S30 or pin valve, kit includes:
Outlet:Rubber sleeve to fit the outlet, or safety port on homebrew pressure barrel valves. A special three or four pronged tool is required to fit this rubber or you have to be 'creative'.
Relief:
A replacement rubber relief washer for a standard S30 valve that fits over the larger, fatter section of the valve that is outside the barrel body.
Washer:
A replacement rubber washer for a standard S30 valve that fits over the small, thinner section of the valve that is inside the barrel body.
O’Ring:
This is the rubber washer used to create a seal between Pin Valves or S30 Valves and the barrel cap. It is a flat rubber washer, 26mm outer diameter, 18mm inner diameter and 2mm thick, that sits between the valve body and the top of the barrel cap to ensure an airtight seal on your keg.
It should not be confused with the Drum Tap Washer that is used to seal drum and quick serve taps, which looks similar but has a larger diameter and is unsuitable for use with the valves.
